Making a switch to a HD TV or just cutting the cord, getting a TV antenna installed is a smart move. With Antenna Installation in Melbourne you get access to news, sports, and even the famous network shows. All you have to do is pay a minimum subscription monthly. However, to get the TV Antenna Installation in Melbourne you must be aware of a procedure. For that the right tools and much more is required. Going ahead, in this blog you will come across a lot of information including location, right antenna, where it will be mounted and fine tuning of the signal.
Steps to a TV Antenna Installation in Melbourne:
You don’t just need to rush to place an online order for an antenna. You must first take into consideration the location and the availability of the TV signal.
1. Needs & Availability of the Signal
Visit sites such as TV Fool, or maybe FCC DTV Reception Map. You must enter your postcode to check a variety of local stations, signal strength, distance and direction from the location. You can categorize the signals such as strong, moderate or weak. This can impact outdoor or indoor antennas.
2. The Right Equipment & Antenna
Once all your needs are assessed it is necessary to get a top-notch quality antenna which goes well with all the locations. Make sure to buy from a reputed store when it’s about Digital Antenna Installation in Melbourne.
3. Suitable Location for Antenna
How your antenna performs depends heavily on the place from where you buy it. You can aim for a location with less obstructions between the broadcast towers and the antenna. If we compare between outdoor and indoor, then the outdoors is better as there are less objects and walls. Even the attics or roofs give better outcomes in comparison to ground level installations. When doing outdoor TV Antenna Installation in Melbourne make sure to avoid any obstruction such as buildings, trees and even the metal structures.
4. Assembling of Antenna
If the antenna is in parts, you must assemble them. Make sure to use proper tools such as adjustable wrenches and many others for making the assembly of the antenna smooth.
5. Mounting the Antenna
After the assembly of the antenna, make sure to mount it well. However, the procedure is entirely based on the attic, exterior wall, etc. And you must avoid placing it surrounding the metal ducts or even the heavy installations blocking signals.
6. Grounding the Antenna
This step is very important from the safety concerns so that no damage happens even after the lightning tends to strike. It is also often associated with electrical codes. For this step, we recommend a certified professional for Antenna Installation in Melbourne.
7. Connecting with the Coaxial Cable
You must run the Coaxial Cable starting from the antenna to the tuner or TV. You must take into consideration the length of the cable. The longer cables start to weaken the strength of the signal.
8. Scanning for Channels
To do the scanning, you must turn on the TV or just visit settings, Then select “channel setup” or “antenna”. Then choose “Air” or “over-the-air” as the input. Then select “Auto Scan” or “Auto Program”.
The Last Words
If you think you are not getting the right picture quality, then just ensure to position your Digital Antenna Installation in Melbourne for an improvement in reception. You must raise the antenna higher, rotate it slightly and then rescan channels or just reposition if it is indoors.